- Welcome to Plaza Forum.
Recent posts
#41
Packaged Website Stories Feedback / Re: Scanned, Shipped, Printed ...
Last post by baron law - May 01, 2025, 09:18:50 PMOne trait I do share with Phil is a love of surprises. I'll have to keep my eyes open for more subtle "creative consequences".
That being said and not to tease you into any rash evil plotting against me. But many of the ideas you are bringing up I am currently exploring in the newest Phil, Maggie, and Paula storyline."Scanned, Printed and Sealed" implied subtitle Further adventures at the Fantastic Plastics factory.
Rapid prototyping to literally encase a visitor during their visit would be quite amusing, at least for the other guests. Of course it could be done quickly with the sarcophagus model by changing out what I called the modular body plates. Let's just hope they are as big a fan of encasement bondage as Phil is.
Not to steal my own ideas (Jabbas Palace), but an AI paired with an unfeeling corporate executive is a very dangerous combination. Maggie and Paula enjoy tormenting Phil and pushing his boundaries, but they do actually care about him. Even if it's easy to forget there is a soft Phil center inside some of their devices / ideas.
Also in the new storyline Phil does get to experience a chastity device of sorts.
Don't want to give too much away, but just letting you know your feedback is not falling on deaf ears. Also your mind is in some cases on the same track as mine in exploring the abilities of this fantasy world of sex and 3-D printing.
Wish I could speed up the "printer" process in getting you the new stuff quicker. But then antici......
....pation can be delightfully naughty and rewarding in itself.
-Baronlaw
That being said and not to tease you into any rash evil plotting against me. But many of the ideas you are bringing up I am currently exploring in the newest Phil, Maggie, and Paula storyline."Scanned, Printed and Sealed" implied subtitle Further adventures at the Fantastic Plastics factory.
Rapid prototyping to literally encase a visitor during their visit would be quite amusing, at least for the other guests. Of course it could be done quickly with the sarcophagus model by changing out what I called the modular body plates. Let's just hope they are as big a fan of encasement bondage as Phil is.
Not to steal my own ideas (Jabbas Palace), but an AI paired with an unfeeling corporate executive is a very dangerous combination. Maggie and Paula enjoy tormenting Phil and pushing his boundaries, but they do actually care about him. Even if it's easy to forget there is a soft Phil center inside some of their devices / ideas.
Also in the new storyline Phil does get to experience a chastity device of sorts.
Don't want to give too much away, but just letting you know your feedback is not falling on deaf ears. Also your mind is in some cases on the same track as mine in exploring the abilities of this fantasy world of sex and 3-D printing.
Wish I could speed up the "printer" process in getting you the new stuff quicker. But then antici......
....pation can be delightfully naughty and rewarding in itself.
-Baronlaw
#42
Packaged Website Stories Feedback / Re: Scanned, Shipped, Printed ...
Last post by feline - May 01, 2025, 01:32:20 PMHah, I know I have been told I am no good at subtle, but I would like to think the first surprise would be a little more subtle and clever than that! Otherwise it is never going to qualify as a surprise!
Note to self - comment enough for several fans, we have some seriously interesting writing to encourage here!
I hadn't thought of a Sex Toys Expo at all, but that would actually work very well, and make a lot of sense. To expand on the idea slightly, I was thinking any statue display would sit on, be merged into, a base. The base gives you storage space for the electronics, fluid storage, etc. If you want to keep with the option of "long term" encasement, so a couple of days or more, you need to think about this. Thin tubes for liquids can easily be run inside the case, especially if you allow for bodies to be a little compressed, with care. Watch for pressure points, etc.
Then you also need thin sensors, so a readout display can be enabled when it is time to "entertain" the models.
Thinking in terms of this setting, and thinking back to the mesh that was printed over our sarcophagus, outside of the joints, you don't actually need a solid layer of plastic to enclose and remove all motion. So a different approach would be to have entire parts of the body covered by a rigid "mesh", giving a largely "naked" and available for touching model, who is still completely restrained, compressed and unable to move.
If you want to take this thought a step further, you could have a two layer outfit, so place a thin "surface skin" layer over the top, at which point suddenly we are back to simply a statue, with no hint for the unaware that there is a person locked up inside.
This then opens up the fun and games of the models being prepared off site, and then shipped to the expo for display, and any interaction with the guests that their suits allow for...
I never really firmed up my thought process here, I was just trying to think of a fun and interesting "display" and "interactive" use of a thin layer encasement, but something more interesting than just securing someone, male or female, in place as a convenient sex object. Nothing wrong with that at all, but without something more to make it a bit more interesting, this is "just" bondage and sex, without really making use of the extra options this fascinating printer and process is offering us.
But the sort of outline I was thinking of was the company CEO having a model, or perhaps more fittingly, a second secretary placed into one of these "display" shells for a couple of days at a time. Depending on the programming given to the display shell, this can either be a reward for good behaviour, or a punishment to encourage them to try harder in future. Most of the time the shell would be fully sealed up, simply being a beautiful piece of highly detailed art that came out of the companies printers, something to help set the stage and demonstrate the scale of pieces that can be "quickly and easily" produced. Stage setting for all of the visitors that drop by, or even placed into the company lobby, since you need to show off what they can make, to help get people interested.
But for the people who are more interested in the adult side of things, you need to have a simple way of showing that this is not just a hollow shell. You don't want to open it up completely, and a video showing a model / secretary being placed into it only has so much to show. But a few removable panels, suddenly you have the naked breasts on an anonymous, completely silent and unable to move woman out on display to touch, feel and tease... add in the feedback from the embedded sensors, once the display is turned on, and you can see them responding with spikes on heart rate and breathing, brain wave patterns changing, all responding to the touch and exploration of the exposed flesh... it is about bringing the concept alive.
Plus, of course, a serious selling point is the speed of customisation... so is there a woman, or even a man, with you in the entourage of the visiting VIP who isn't needed for the next meeting or two... well, send them off to be scanned, and come back in a couple of hours, or less, since it is a thin shell, all that needs to happen is customise an existing design for the new body scan, and watch as they are sealed away. "Don't worry, they are quite safe, here, use this app on your phone and you can monitor all their vitals in real time, speak to them through the built in ear buds, check their responsiveness with our full range of option extras that were installed into this model... Of course you can take the shell away with you, it will only perfectly fit your secretary after all, so its of no use to us. Consider it a gesture of good will..." Leaving it up to them if they need to open the shell up or not before shipping, just to really add to the fun on offer *evil smirk*
Oooh... thinking about this a bit more, metallic plastic... I am thinking its not a big step to consider printing wires into the shell, the bulk of some very simple sensors... the idea is to get a nearly ready to go shell straight from the printer, with the minimum amount of finishing required afterwards. It wouldn't be as good as adding high end sensors, etc, afterwards, but a lot faster and cheaper. Plus a tens pad is "just" electrical contact with the skin, so could be printed in as well.
In the back of my mind for this is the way I remember the VP, Steve (just checked) from your Halloween story "Jabba's Palace Party", who seemed to take a very casual "people are just objects for my pleasure" attitude to people. Not looking for a clone, just thinking that a rather casual attitude towards using people as objects fits with how many people in power tend to be portrayed, if not actually are. Plus, it can work well in echoing a dominant mindset of "this is happening because I want it to happen", while we have a very safety and consent first Paula acting as a counter balance within the company, at least to some degree at least. You need someone passionate about all of this, who wants to see their ideas taken seriously, printed up and tested out, and as we have seen, Paula really has no objections to a surprise or three, especially if someone else is happy to step up and take "moral responsibility" for their captive and the surprises that are being applied to them. Look at the events so far... yes, everything, included the detailed scans and monitoring, proves how much Phil enjoys and responds to what is being done to him, but there is a clear sense of "happy to push the limits since we know he will forgive us later" along with "Maggie said it was all good, so it is," at work here that gives this a small, gentle but still delicious edge. No need to go to far or get to nasty!!!
Now, on a completely different front, I was thinking about thin shells, and "wearable", and went "corset" along with "chastity belt". Perhaps even high healed boots. All things that could be printed, person specific, small and fast to produce, but then "locked" on...
Note to self - comment enough for several fans, we have some seriously interesting writing to encourage here!
I hadn't thought of a Sex Toys Expo at all, but that would actually work very well, and make a lot of sense. To expand on the idea slightly, I was thinking any statue display would sit on, be merged into, a base. The base gives you storage space for the electronics, fluid storage, etc. If you want to keep with the option of "long term" encasement, so a couple of days or more, you need to think about this. Thin tubes for liquids can easily be run inside the case, especially if you allow for bodies to be a little compressed, with care. Watch for pressure points, etc.
Then you also need thin sensors, so a readout display can be enabled when it is time to "entertain" the models.
Thinking in terms of this setting, and thinking back to the mesh that was printed over our sarcophagus, outside of the joints, you don't actually need a solid layer of plastic to enclose and remove all motion. So a different approach would be to have entire parts of the body covered by a rigid "mesh", giving a largely "naked" and available for touching model, who is still completely restrained, compressed and unable to move.
If you want to take this thought a step further, you could have a two layer outfit, so place a thin "surface skin" layer over the top, at which point suddenly we are back to simply a statue, with no hint for the unaware that there is a person locked up inside.
This then opens up the fun and games of the models being prepared off site, and then shipped to the expo for display, and any interaction with the guests that their suits allow for...
I never really firmed up my thought process here, I was just trying to think of a fun and interesting "display" and "interactive" use of a thin layer encasement, but something more interesting than just securing someone, male or female, in place as a convenient sex object. Nothing wrong with that at all, but without something more to make it a bit more interesting, this is "just" bondage and sex, without really making use of the extra options this fascinating printer and process is offering us.
But the sort of outline I was thinking of was the company CEO having a model, or perhaps more fittingly, a second secretary placed into one of these "display" shells for a couple of days at a time. Depending on the programming given to the display shell, this can either be a reward for good behaviour, or a punishment to encourage them to try harder in future. Most of the time the shell would be fully sealed up, simply being a beautiful piece of highly detailed art that came out of the companies printers, something to help set the stage and demonstrate the scale of pieces that can be "quickly and easily" produced. Stage setting for all of the visitors that drop by, or even placed into the company lobby, since you need to show off what they can make, to help get people interested.
But for the people who are more interested in the adult side of things, you need to have a simple way of showing that this is not just a hollow shell. You don't want to open it up completely, and a video showing a model / secretary being placed into it only has so much to show. But a few removable panels, suddenly you have the naked breasts on an anonymous, completely silent and unable to move woman out on display to touch, feel and tease... add in the feedback from the embedded sensors, once the display is turned on, and you can see them responding with spikes on heart rate and breathing, brain wave patterns changing, all responding to the touch and exploration of the exposed flesh... it is about bringing the concept alive.
Plus, of course, a serious selling point is the speed of customisation... so is there a woman, or even a man, with you in the entourage of the visiting VIP who isn't needed for the next meeting or two... well, send them off to be scanned, and come back in a couple of hours, or less, since it is a thin shell, all that needs to happen is customise an existing design for the new body scan, and watch as they are sealed away. "Don't worry, they are quite safe, here, use this app on your phone and you can monitor all their vitals in real time, speak to them through the built in ear buds, check their responsiveness with our full range of option extras that were installed into this model... Of course you can take the shell away with you, it will only perfectly fit your secretary after all, so its of no use to us. Consider it a gesture of good will..." Leaving it up to them if they need to open the shell up or not before shipping, just to really add to the fun on offer *evil smirk*
Oooh... thinking about this a bit more, metallic plastic... I am thinking its not a big step to consider printing wires into the shell, the bulk of some very simple sensors... the idea is to get a nearly ready to go shell straight from the printer, with the minimum amount of finishing required afterwards. It wouldn't be as good as adding high end sensors, etc, afterwards, but a lot faster and cheaper. Plus a tens pad is "just" electrical contact with the skin, so could be printed in as well.
In the back of my mind for this is the way I remember the VP, Steve (just checked) from your Halloween story "Jabba's Palace Party", who seemed to take a very casual "people are just objects for my pleasure" attitude to people. Not looking for a clone, just thinking that a rather casual attitude towards using people as objects fits with how many people in power tend to be portrayed, if not actually are. Plus, it can work well in echoing a dominant mindset of "this is happening because I want it to happen", while we have a very safety and consent first Paula acting as a counter balance within the company, at least to some degree at least. You need someone passionate about all of this, who wants to see their ideas taken seriously, printed up and tested out, and as we have seen, Paula really has no objections to a surprise or three, especially if someone else is happy to step up and take "moral responsibility" for their captive and the surprises that are being applied to them. Look at the events so far... yes, everything, included the detailed scans and monitoring, proves how much Phil enjoys and responds to what is being done to him, but there is a clear sense of "happy to push the limits since we know he will forgive us later" along with "Maggie said it was all good, so it is," at work here that gives this a small, gentle but still delicious edge. No need to go to far or get to nasty!!!
Now, on a completely different front, I was thinking about thin shells, and "wearable", and went "corset" along with "chastity belt". Perhaps even high healed boots. All things that could be printed, person specific, small and fast to produce, but then "locked" on...
#43
Pet & PonyGirl Stories / Re: Vanity Mare by thepinkbish...
Last post by Ponyfan12 - April 30, 2025, 09:55:50 PMI absolutly love this story. The first part was already awesome, but with this one you pictured the world even better and i cant wait to read the next part!
#44
Packaged Website Stories Feedback / Re: Scanned, Shipped, Printed ...
Last post by baron law - April 30, 2025, 08:41:18 PMMaybe something like a display mannequin at a Sex Toys Expo. Food for thought.
Thanks for thinking I have more than a singular fan, but until someone else comments you are it.
I'll feel safe and anonymous until a crate with a sarcophagus shows up on my doorstep.
-Baronlaw
Thanks for thinking I have more than a singular fan, but until someone else comments you are it.
I'll feel safe and anonymous until a crate with a sarcophagus shows up on my doorstep.
-Baronlaw
#45
Packaged Website Stories Feedback / Re: Scanned, Shipped, Printed ...
Last post by feline - April 30, 2025, 07:05:16 PMTalking about the thinner and lighter plastics idea, I have been wondering what else could be done with it, and tried to think of something fitting, yet a little bit different. One idea that seems like it might have some potential uses a female model, and I am thinking a statue display. Something artistic and elegant, but with removable breast covers.
There is something about the idea of a totally anonymous, helpless woman, placed and shaped into a display piece, put up and on display like this, only to discover that for some of the time she will be less "art" and more "part sex object" that is still partly an artistic display.
Trying to find more ways to make interesting use of the whole "you are now an object" aspect of this, that shows everyone on the outside that there is someone inside, while still keeping a very firm distinction and separation between the inside and the outside.
As for being the only fan, I very much doubt that, but experience shows that most people don't comment much, so I try to make up for their silence.
As for "creative consequences", well, it is always best to feel safe and anonymous... *smirk*
There is something about the idea of a totally anonymous, helpless woman, placed and shaped into a display piece, put up and on display like this, only to discover that for some of the time she will be less "art" and more "part sex object" that is still partly an artistic display.
Trying to find more ways to make interesting use of the whole "you are now an object" aspect of this, that shows everyone on the outside that there is someone inside, while still keeping a very firm distinction and separation between the inside and the outside.
As for being the only fan, I very much doubt that, but experience shows that most people don't comment much, so I try to make up for their silence.
As for "creative consequences", well, it is always best to feel safe and anonymous... *smirk*
#46
Links / Re: Giantess Stories & Blog by...
Last post by SolomonG - April 29, 2025, 11:49:50 PMGood morning everyone,
Here are the latest blog posts:
Four More Albert Robinson Stories, Tiny Men Going into Huge Butts
https://thereshegrows.net/2025/04/30/four-more-albert-robinson-stories-tiny-men-going-into-huge-butts/
"Taylor's Growth Truth" by TaylorMadeClips
https://thereshegrows.net/2025/04/30/requested-review-taylors-growth-truth-by-taylormadeclips/
April 2025 Reader Questions & Review Requests
https://thereshegrows.net/2025/04/30/april-2025-reader-questions-review-requests/
Respectfully,
SolomonG
Amazon Author's Page: https://www.amazon.com/author/solomong
Blog: https://thereshegrows.net/blog/
Bluesky: https://bsky.app/profile/solomong.bsky.social
E-junkie: https://solomong.e-junkie.com/
X/Twitter: https://twitter.com/AuthorSolomong
YouTube: https://www.youtube.com/channel/UCBciPE_SJBlvASYmsj7zSwA
Here are the latest blog posts:
Four More Albert Robinson Stories, Tiny Men Going into Huge Butts
https://thereshegrows.net/2025/04/30/four-more-albert-robinson-stories-tiny-men-going-into-huge-butts/
"Taylor's Growth Truth" by TaylorMadeClips
https://thereshegrows.net/2025/04/30/requested-review-taylors-growth-truth-by-taylormadeclips/
April 2025 Reader Questions & Review Requests
https://thereshegrows.net/2025/04/30/april-2025-reader-questions-review-requests/
Respectfully,
SolomonG
Amazon Author's Page: https://www.amazon.com/author/solomong
Blog: https://thereshegrows.net/blog/
Bluesky: https://bsky.app/profile/solomong.bsky.social
E-junkie: https://solomong.e-junkie.com/
X/Twitter: https://twitter.com/AuthorSolomong
YouTube: https://www.youtube.com/channel/UCBciPE_SJBlvASYmsj7zSwA
#47
Packaged Website Stories Feedback / Re: Scanned, Shipped, Printed ...
Last post by baron law - April 29, 2025, 07:23:44 PMI am big Terry Pratchett fan, so I do understand your comment.
I'd be slightly more worried about "creative consequences" if I was not safely hidden behind the anonymity of this interface.
That being said I have no desire to lose my singular fan, so I do hope the webmaster posts parts 4 and 5 soonish.
Also to reassure you from taking any untoward actions in punishing this humble author, even though part five is a natural break point in the story. I do have parts six and seven outlined.
And I am only taking a break after part five to explore your thinner and lighter fantastic plastics idea.
-unrepentant
I'd be slightly more worried about "creative consequences" if I was not safely hidden behind the anonymity of this interface.
That being said I have no desire to lose my singular fan, so I do hope the webmaster posts parts 4 and 5 soonish.
Also to reassure you from taking any untoward actions in punishing this humble author, even though part five is a natural break point in the story. I do have parts six and seven outlined.
And I am only taking a break after part five to explore your thinner and lighter fantastic plastics idea.
-unrepentant
#48
BoundStories Website Stories Feedback / Re: Sally's Subject by Jack Pe...
Last post by feline - April 29, 2025, 11:46:49 AMHere I would point out that Sally's speech screamed "something is not quite right" very loudly, right from the outset. But our victim wasn't in any position to act on this warning, or get the hell out of the way, since it was already far to late for him when he first got the warning.
I am tempted to ask why the hell anyone else would ever work with her, but the answer "lots and lots of money" seems clear enough from the clues provided.
Definitely well written, interesting enough to make me want to know how it ended, even as it got more and more disturbing as it went along.
I am tempted to ask why the hell anyone else would ever work with her, but the answer "lots and lots of money" seems clear enough from the clues provided.
Definitely well written, interesting enough to make me want to know how it ended, even as it got more and more disturbing as it went along.
#49
Packaged Website Stories Feedback / Re: Scanned, Shipped, Printed ...
Last post by feline - April 29, 2025, 11:42:19 AMI am reminded of the risk of encouraging Granny Weatherwax to go away and think about what to do... but if the reference means nothing, then I will let the results, when they appear, speak for themselves...
Let you hope that parts 4 and 5 aren't long in coming, and that they solve these outstanding concerns...
The journey so far has been most excellent, but this is far to early, and the wrong place, to end that journey.
Let you hope that parts 4 and 5 aren't long in coming, and that they solve these outstanding concerns...
The journey so far has been most excellent, but this is far to early, and the wrong place, to end that journey.
#50
BoundStories Website Stories Feedback / Re: Sally's Subject by Jack Pe...
Last post by jakbird - April 28, 2025, 09:43:01 PMI should point out anyone with the moral character needed to stand up to Sally would not be working for her in the first place....
Femdom type stories are not my forte, so even though I try to write outside my tiny box once in a while it's with the intention of Something Completely Different. Psycho Sally is an attempt to delve into the psychopathic mentality of the individual who has no empathy, no shred of human decency, but one who is also skilled in the art of deception and misdirection. Naturally she isn't perfect; the twin flaws of speaking in third person and of stressing words should be sufficient to warn anyone paying attention that Something Is Not Quite Right. Fortunately (or unfortunately), the victims in the stories never seem to pick up on it.
Thanks to everyone for the comments. If it's disturbing, then my work is done.
Jack Peacock
Femdom type stories are not my forte, so even though I try to write outside my tiny box once in a while it's with the intention of Something Completely Different. Psycho Sally is an attempt to delve into the psychopathic mentality of the individual who has no empathy, no shred of human decency, but one who is also skilled in the art of deception and misdirection. Naturally she isn't perfect; the twin flaws of speaking in third person and of stressing words should be sufficient to warn anyone paying attention that Something Is Not Quite Right. Fortunately (or unfortunately), the victims in the stories never seem to pick up on it.
Thanks to everyone for the comments. If it's disturbing, then my work is done.
Jack Peacock
SMF spam blocked by CleanTalk